Step 1. Identify stump to be removed, and dig up the earth around the stump, exposing the roots and the sides of the stump. This is best achieved by using a pick axe and a round mouth shovel.
Step 2. Using an axe, chainsaw, hand saw, reciprocating saw, or any other method you have at your disposal, cut the roots which start at the stump and move in multiple directions. You must cut all roots to have a chance to remove this yourself.
Step 3. Assuming you don’t have a tap root (a root extending from the bottom centre of the stump straight down) you can attempt to pry the stump out using a pry bar with a high fulcrum for the most amount of leverage.
Step 4. If a tap root exists, or you just can’t get the stump out, try to make further cuts to the stump, focusing as much under it as possible. This can be difficult as your often working in the dirt at this point, which can damage your chainsaw or other power tools your using.
Step 5. Once you feel you’ve cut as much as possible, wrap the stump securely with a chain, and then attach the chain to a tractor or vehicle with pulling power. Attempt a slow pull, being aware that a chain can break and cause damage to person and property.
Step 6. If you do not have a motorized means of pulling, you can try to gain a pull advantage by using a come-a-long tool. This is a ratcheting tool with one end hooked up to the tree stump, and the other end secured to a stationary anchor of some type. The tool is ratcheted and force is increased until you hopefully pull the stump out of the ground.
Or, you call CJ’s Tree Removal for a free quote, and let us do the dirty work.
CJ’s
Nice and useful post. Thanks admin for sharing this article and tips. Stump Removal in Sydney
ReplyDeleteNice post. Thanks for sharing this article.
ReplyDeleteTree Services Sydney
Arborist Sydney
Removing Tree Stump Sydney
Nice post! Thanks for sharing this blogpost. Hire Cheap and Expert Emergency Tree Services in Sydney
ReplyDelete
ReplyDeleteHi dear,
Thank you for this wonderful post. It is very informative and useful. I would like to share something here too. Maryland tree services, MD tree removal, tree trimming and stump removal, cheap discounted prices. We will beat any service estimate in Bel Air, Baltimore county and surrounding areas.
Maryland tree trimming
This Tree Lopping Sydney company understands about customer satisfaction and that is why they do everything that they can in order to make each and every customer as happy as possible with their services.
ReplyDeleteDepending on the size of the roots, use loppers, a pry bar and/or a hand saw to cut them into manageable pieces and pull what you can out of the ground, clearing away as much of the root system as possible. https://www.treeremovalmelbournearborists.com/ringwood/
ReplyDeletecontact us and then pull it out with like a truck or something. But I want to do this totally by hand if it's just gonna be grass here you don't really have to get rid of the entire stump. And root system.
ReplyDeleteWhen some of the branches have grown onto the rooftop, causing trash to accumulate in the gutters, you should engage a professional tree lopping Redcliffe agency that specializes in pruning trees. When dead limbs must be removed to save the entire tree, tree lopping may be required.
ReplyDeletepenrith tree cutting service
How long does it take Epsom salt to dissolve a stump? check us
ReplyDeleteRemoving a tree stump by hand is a lot of work, but it saves a lot of money.
ReplyDeleteURL: https://www.treeremovalmelbournearborists.com/ringwood/